Light putty styrene-containing

presto Light putty "styrene-containing" has, due to the use of novel fillers, a density lower than 1 kg / dm³. That means, that the weight of the Light putty is only half as high as conventional fillers. Therefore you can use it on objects, which shall not be loaded with high weight.

  • white
  • 420 G

Amazon Go to shop

Characteristics

  • Easy processing
  • Easy to sand
  • The contents of e.g. 420g corresponds to a volume of > 520ml
  • Results in a very smooth surface
  • Special elasticity allows the use on objects which are exposed e.g. to high fricton or vibrations, even during low temperatures
  • Composition of highly-reactive, unsaturated polyester resin with a combination of mineral and synthetic fillers
  • Short curing time
  • Free of asbestos and silicone
  • Very good adhesion
  • Resistant to weak acids and bases, propellants, solvents, water and de-icing salt

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. The surface must be clean, dry and free of grease.
  2. Remove the red secure ring with a screwdriver.
  3. Shake the can firmly for approx. 2 - 3 minutes before use.
  4. Test spray and check paint compatibility on an inconspicuous area. Mask off surfaces not to be painted.
  5. Keep a spraying distance of 25-30 cm.
  6. Paint in a cross-coat pattern

Related products

No primer is required for this product!

Choose your language