PTFE-Spray
dry

Dry surface lubricant for treating mechanical parts made of metal and plastic e.g. seat tracks, seat belts, zips.

  • white transparent
  • 400 ML | 150 ML

Amazon Go to shop

Characteristics

  • Leaves behind pure PTFE, no grease or oil (dry film)
  • Very low friction coefficient
  • Excellent adhesion
  • Prevents wear and clamping
  • Special valve allows applicaton in any position (360° valve)
  • Also suitable as an anti adhesive for injection moulds that are not allowed to come into contact with silicone (release spray)
  • Suitable for parts that are exposed to light loads and/or low speeds
  • Directed jet spray

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. Bring the can to room temperature.
  2. Operating temperature 5° to 30°C.
  3. Shake can vigorously before use.
  4. Apply presto PTFE Spray dry in a thin even layer.
  5. A dry PTFE film is left after evaporation (approx. 1 minute).

Related products

PTFE-Spray

PTFE-Spray

High-quality synthetic all-purpose lubricant with powerful moisture and rust repellent properties.
Cold Shock Rust Solvent

Cold Shock Rust Solvent

Highly effective tool for loosening rusted components by generating local cooling. Special ingredients create a short-term "cold shock" (-30 ° C) on the rusted workpiece, which causes shrinkage and at the same time allows the lubricating components to penetrate.
POWER Brake Cleaner

POWER Brake Cleaner

Cold degreasing special cleaner with higher pressure for even more effective cleaning. For removing oil, grease, dirt, brake fluid from brake drums, pads, discs, lines, cylinders and clutch parts.

Choose your language