Cold Shock
Spray

Highly effective tool for loosening rusted or pressed connections. Special ingredients create a short-term "cold shock" (-50 ° C) on the rusted workpiece, which causes shrinkage.

  • browny-transparent
  • 400 ML

Amazon Go to shop

Characteristics

  • Short-term cold shock -50°C
  • Works in seconds
  • Leaves no residue
  • Free from fat and silicone
  • To avoid damage by heat during soldering
  • Directed jet spray
  • Can be sprayed from any angle due to a special 360° valve

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. The surface must be clean, dry and free of grease.
  2. Remove the red secure ring with a screwdriver.
  3. Shake the can firmly for approx. 2 - 3 minutes before use.
  4. Test spray and check paint compatibility on an inconspicuous area. Mask off surfaces not to be painted.
  5. Keep a spraying distance of 25-30 cm.
  6. Paint in a cross-coat pattern

Related products

No primer is required for this product!

Choose your language