Effective cleaner for diesel particulate filter, for loosening and removing of carbon and ash deposits in diesel particulate filters without dismantling. Includes spray probe.
Before use, carefully read and follow the instructions on the packaging.
Please observe the instructions of the vehicle manufacturer. If the car does not start because of clogged diesel particulate filter, the cleaning must not be carried out. For professional use only.
Operating temperature 5° to 30°C.
Shake can for 2 minutes before use.
Before use, allow the engine to cool down (max. 50 ° C).
Remove temperature or pressure sensor from the filter.
Insert the special tube into the opening.
Empty the can in the following intervals: spray 3-5 times; allow to soak for 5 sec. Do not shake the can during use.
Install temperature or pressure sensor.
Start the engine and run at least 15 minutes to evaporate most of the fluid.
Make a 30-minute test drive. This may cause the formation of steam. Interrogate fault memory, if necessary, delete.
